Procover fender covers are exclusively designed for all sizes of fenders including Polyform, Taylor, Majoni, Anchor Marine, Dan Hill Plast and Plastimo and also specialise in Inflatable fenders including Henshaw, Avon, Aere and Novurania.
It is critically important to inflate your fender to the correct size. Over or under-inflating your fender will reduce the overall effectiveness of your fender and may cause premature failure of your fenders. It will also affect the protection of your boat and the fitting of your new fender covers. To ensure perfect fit of your new fender covers, Procover recommends to inflate the fender based on your fender manufacturers specifications. If this information is not readily available to you, we would recommend inflating to a maximum of 2 PSI. This information is to be used as a general guide. Common sense and understanding your boat and docking conditions must also be considered. It is the responsibility of the customer to ensure proper steps are taken due to so many variables, Procover cannot be held responsible for improper fitting measurements.